We had an 1/3 hp insinkerator badger and the grinding chamber
actually cracked and split. So, off to shopping–came across this unit
and wanted to try a different company’s machine. The price was right for
the size of the unit. I took this out of the box, reviewed the install
and completed the project in less than 45 minutes. The unit looks great
and fit perfectly where the badger was. Of interest, the 9980 comes with
a 90 degree elbow out of the side of the machine to hook to the waste
line. On a double sink, this wouldn’t work. So I used the tail from the
badger which was a straight pipe and discarded the elbow. The unit then
fit right into place–picture perfect. It seems to me on the height and
hookup, the measurements were exact to that of the insinkerator badger.
So the hardest part of the install was removing the old unit which was
seemingly extremely tight in place–that took the majority of the time.
Of other interest, when you go to fit the collar to the unit, make sure
you use soft soap as it suggests–the unit popped right into place with
no struggle. Also, the instruction says on a stainless sink to not use
plumber’s putty but to use the rubber gasket–did and no leaks.
http://www.lowcosttoday.com/waste-king-9980-legend-series-1-hp-continuous-feed-operation-waste-disposer/
ไม่มีความคิดเห็น:
แสดงความคิดเห็น